The U3A project is based on a (FT232) that ist used as USB (Full Speed) to serial UART transceiver. Most signals of the (FT232) are routed to the connector pins J2 and J4. Whithin the DIP switches the ...

Adapter to connect the TC2030 IDC cable to a USB-to-UART Adapter. This can be used to program ESP32 boards (or any other UART compatible microcontroller) without a big footprint on the PCB. Boot and ...

Electronics engineer Ravinder who has been working in the embedded industry for past 10 years developing products based on Raspberry Pi, Raspberry Pi Pico, Arduino, Jetson Nano and others. Has taken ...

I’ve never had specific issues with USB to TTL debug boards personally, but potentially you could damage the target if you select one with the wrong voltage, and for more advanced use cases often do ...

What is the easiest way to get audio from a WAV file into a line-level format, ready to be plugged into the amplifier of a HiFi audio set (or portable speaker)? As [Konrad Beckmann] demonstrated on ...

The MAX3349E ±15 kV ESD-protected, USB transceiver provides a full-speed USB interface to a lower voltage microprocessor or ASIC. The device supports enumeration, suspend, and VBUS detection. A ...

The operation and description of the UART serial interface through USB is discussed in this application note. In addition, the firmware application code in C language, containing communication ...

Waveshare has recently released the Pi5 Connector Adapter (C), an upgraded version of its earlier Pi5 Connector Adapter, ...